[Dúvida] Erro a 'Plotar'

[TiCo]

Aparece-me este erro em alguns ficheiros *.dwg Alguém sabe como contornar o problema?



Estou a usar Autocad LT 2006 e uma HP designjet 500ps, penso que o problema venha de ficheiros realizados noutros programas e posteriormente exportados para *.dwg

[3CPO]

HP Designjet printer error when printing from AutoCAD®

Published date: 2006-01-03
ID: TS1052643

Applies to:
AutoCAD® 2006
AutoCAD® 2005

Issue

When you tried to plot from AutoCAD® 2005 or 2006, you received the following error message:

Printer driver for HP DesignJet printers in Windows NT

Printer driver HP DesignJet printers in Windows NT has encountered a problem and needs to close. We are sorry for the inconvenience.

Solution

This issue occurs because of the PCL3GUI Framework that was used for the PCL3GUI Drivers (v.6.03). With this driver, the size of the character array used to store the path of a job was not based on the length of the path name. Therefore, when long path names are received, the driver is not able to store the entire path name and it crashes.

To correct this issue, you will need to install a newer version of the driver (higher than v.6.03) that contains a correction or fix.

You could also use one of the following work-arounds:

* Copy the document you would like to print to a lower directory and/or reduce the number of characters in the file name.
* On the AutoCAD 2005/2006 Plot and Publish tab (On the Tools menu, click Options > Plot and Publish tab), under Background processing options, select Enable background plot when Plotting.

Fonte: http://usa.autodesk.com

Também me acontece isso e até agora nunca me tinha dado ao trabalho de resolver... eu crio sempre para pdf's... depois é uma simples impressão do pdf...

Abraços

[TiCo]

É que nós temos tido bastantes probs com isso! Mas ja consegui resolver! Era mesmo drivers.... noob stuff, stupid question... :wall: